Reversed Riser
Pick this if you flipped the stock risers backward, with no crossbar.
Keeps the gauge close to its factory spot and angle.
Listed for the 2014–2020 dash only for now.
Choose this ›
MT-07 Cluster Mount · Yamaha MT-07 & FZ-07
Your dash,
where your bars are.
Flipped your risers, added a crossbar, or built a cage? This 3D-printed mount puts the gauge cluster back where you can read it. Four styles, for the 2014–2020 and 2021–2022 dash.
Which one do I need?
Two choices.
Get them right once.
The mount has to match your dash and your bars. Pick your model year, then your bar setup.
1 Your model year sets the dash
2014–2020
Early-generation dash, FZ-07 included. All four styles.
2021–2022
Updated dash. Made to order: ships in about 2 days.
2023 or newer?
The 2023+ bikes have the new TFT display, and we don't make a mount for it yet. Contact us if you're interested.
2 Your bars set the style
Standard Riser Bars With Crossbar
Pick this if your risers face the stock way and your bars have a center crossbar.
Sets the cluster slightly back, clear of the crossbar.
Also called the Crossbar Offset mount.
Choose this ›
Reversed Riser Bars With Crossbar
Pick this if you flipped the risers and run a crossbar.
Lifts the cluster higher to clear the bar, at a natural viewing angle.
Choose this ›
Cage or Frame Mount
Pick this if you run a crash cage or a tube frame.
Clamps to round tubes from 25 to 32 mm (1" to 1-1/4"), which covers most MT-07 cages, and turns a full 360°, so you choose the angle.
Choose this ›Not sure? Send us a photo of your cockpit and we'll tell you which one.
What you get
Printed to fit. Quick to fit.
- The mount Precision 3D printed in ASA, a tough engineering plastic that stands up to sun and heat. Made for your dash and bar setup.
- Hardware Cage or Frame Mount: clamp hardware included, for 25–32 mm tubes. Riser and crossbar styles: they reuse your stock cluster bolts, so no extra hardware is needed.
- Install About 5 minutes, with standard tools.
- Take the cluster off the stock bracket.
- Attach the cluster to the mount.
- Fit the mount to your handlebars, or clamp it to your cage tube.
- Turn the bars lock to lock and check the wiring has slack, then ride.
Choose your mount
Model year.
Then style.
- $30 Any style, either dash.
- 2014–2020 All four styles.
- 2021–2022 Crossbar and cage styles, made to order (ships in about 2 days).
- 2023 or newer Not available yet for the new TFT display. Contact us if you're interested.
While you're up front
Make the fork as good as the cockpit.
The Prime Series Emulator adds 4-way adjustable compression and rebound damping to the stock MT-07 fork. About 20 minutes, and the forks stay on the bike.
See PrimeQuestions
Good to know.
Which dash do I have?
2014–2020 bikes have the early-generation dash. 2021 and later have the updated design. Choose your model year and you get the mount for your dash.
I ride a 2023 or newer MT-07.
2023 and newer bikes have the new TFT display, and we don't make a mount for it yet. Contact us if you're interested, so we know there's demand.
Can I change the angle?
Only on the Cage or Frame Mount. It clamps onto the tube and turns a full 360°, so you can set any angle or move it later. The riser and crossbar styles are a fixed angle, set for a natural view with their bar setup.
Does it fit the FZ-07?
Yes. The FZ-07 is the US name for the earlier MT-07, so choose the 2014–2020 version.
What if I pick the wrong one?
Check the guide above, or send us a photo before you order. If it still doesn't fit, see our returns policy.